Language Pcl LJ2002.ASC

USING  FILL RECTANGLE RELATIVE

     
     The Fill Rectangle Relative ( RR ) command, defines and
     fills a rectangle using the current pen, the current
     line and fill types and relative X, Y, coordinates. The
     RR command includes an automatic pen down, and when the
     operation is complete, the original pen location and
     up/down status are restored  For more information see
     the Updated PCL 5 Printer Language Technical Reference
     Manual.
     
     
     LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT.
     
     
     EcE                           Resets the printer.
     
     Ec%0B                         Enters HP-GL/2 mode.
     
     IN;                           Initializes HP-GL/2 mode.
     
     SP1;                          Selects pen number 1,
                                   (black). Even though
                                   there is no physical pen,
                                   the SP command must be
                                   used to enable printing.
     
     PA400,400;RR400,800;          Specifies absolute
                                   plotting, then moves to
                                   (400,400); fills a
                                   rectangle with the
                                   default fill color of
                                   black, with (400,400) as
                                   the lower left corner and
                                   the upper right corner,
                                   400 plotter units (plu)
                                   to the right and 800 plu
                                   up from there.
     
     PR0,800;FT3,50;RR400,400;     Enters the relative
                                   plotting mode and moves
                                   800 plu in the Y
                                   direction; selects fill
                                   type 3 (parallel lines),
                                   with 50 plu between each
                                   line; fills a rectangle
                                   with the fill type just
                                   specified, with the
                                   current pen location as
                                   the lower left corner,
                                   and the upper right
                                   corner 400 plu to the
                                   right and 400 plu up from
                                   there.
     
     PR0,400;FT4;RR400,400;        Moves 400 plu up and
                                   selects fill type 4
                                   (cross-hatching); draws a
                                   rectangle using the
                                   current pen position as
                                   the lower left corner and
                                   a point 400 plu to the
                                   right and 400 plu up as
                                   the upper right corner.
     
     PA1200,400;FT;RR400,800;
     ER400,800;                    Moves to absolute
                                   location (1200,400) and
                                   selects the default fill
                                   type (solid black); draws
                                   and edges a rectangle
                                   that begins at the
                                   current pen position and
                                   extends 400 plu to the
                                   right, and 800 plu up
                                   from there.
     
     PR0,800;FT3,50;RR400,400;
     ER400,400;                    Moves 800 plu up from the
                                   current position an
                                   selects fill type 3
                                   (parallel lines), with 50
                                   plu between each line;
                                   draws and edges a
                                   rectangle using the
                                   current pen location as
                                   the lower left corner,
                                   and a point 400 plu up
                                   and 400 plu to the right
                                   as the upper right
                                   corner.
     
     PR0,400;FT4;RR400,400;
     ER400,400;                    Moves 400 plu up from the
                                   current pen position;
                                   selects fill type 4
                                   (cross-hatching); draws
                                   and edges a rectangle
                                   using the current pen
                                   location as the lower
                                   left corner, and the
                                   right corner location is
                                   400 plu to the right and
                                   400 plu up from there.
     
     Ec%0A                         Enters PCL mode.
     
     EcE                           Sends a reset to end the
                                   job and eject the page.



            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.